DIRECTCOMMAND™

Directcommand™ has revolutionized the application management process, giving you reliable application rate control that will help you minimize waste.

COMPLETE CONTROL

Your resources are valuable and important. Whether you have an NH3 toolbar, liquid n sidedress unit, sprayer, spreader or electric starter fertilizer pump on your planter, directcommand will transform the application process, allowing for maximum control.

WHY DIRECTCOMMAND?

• Eliminate overapplication, overlap, spray drift and application gaps
  
• Increase productivity during tight application windows
  
• Reduce fuel costs and field compaction by applying multiple products at one time
  
• Target product application through crop sensing and prescription application strategies
  
• Document all field application data and provide simple reporting
  

SPINNER SPREADER CONTROL

Directcommand™ offers simple spinner spreader control allowing for autoswath, variable rate application, rate control and more.

SPINNER SPREADER CONTROL SIMPLIFIED

Directcommand simplifies spinner spreader control by controlling the spinner speed, in addition to monitoring the bin level. The system reads ground speed and automatically adjusts product flow to match target application rates.

Directcommand control modules support PWM, motorized servo, mark IV.2, mark IV.4 and mark V hydraulic control valves. Directcommand also supports application control of multiple bin spinner spreaders.

CONTAINER SEQUENCING

Container sequencing allows for application of the same product (discrete products or blends) sequentially from multiple containers.

• When product container is low or empty, system automatically advances product application to the next designated container in the sequence
  
• Supported on spinner spreader configurations
  
• User is alerted when system advances product application to the next container
  
• Intuitive setup allows container sequencing to be added to existing configurations
  
• Sequence can easily be edited to fit application needs without having to create a new configuration
  

VARIABLE RATE APPLICATION

Directcommand allows the variable rate application of single or multiple products. The system controls application rates of liquid and granular products automatically, based on geo-referenced prescription maps.

RATE CONTROL

Control, adjust and record field application based on manually entered target rates or by using rates from a variable rate prescription file. The system uses a flow meter signal and speed input from a radar or GPS receiver and reads up to three optional pressure sensors, eliminating the need to monitor pressure gauges outside the cab.

Additionally, enhanced calibration simplifies setup time by creating and storing calibration routines, eliminating the need to recalibrate equipment each time it's used.

NEW LEADER FAN FRAME AND FEED GATE CONTROL

Automatically adjust spinner fan frame position and feed gate based on previously calibrated and stored values. This ensures accuracy and proper equipment settings.

STRIP-TILL APPLICATION

Allow Directcommand™ to control up to three channels of granular product using our strip-till application module.

APPLY FERTILIZER PRECISELY WHERE ITS NEEDED.

Total strip-till fertilizer control

• Control up to three channels of granular product using our strip-till applicator
  
• Simultaneously control anhydrous and nitrogen stabilizer with the addition of liquid and chemical injection control modules
  
• Apply fertilizer only where it's needed based on prescription maps
  
• Record inputs for future reference
  

RATE CONTROL

Control, adjust and record field application based on manually entered target rates or by using rates from a variable rate prescription file. The system uses a flow meter signal and speed input from a radar or GPS receiver and reads up to three optional pressure sensors, eliminating the need to monitor pressure gauges outside the cab.

Additionally, enhanced calibration simplifies setup time by creating and storing calibration routines, eliminating the need to recalibrate equipment each time it's used.

VARIABLE RATE APPLICATION

Directcommand allows the variable rate application of single or multiple products. The system controls application rates of liquid and granular products automatically based on geo-referenced prescription maps.


AUTOSWATH™

Directcommand's autoswath feature reduces overapplication and product waste by automatically turning the applicator (liquid or granular) on/off based on field boundaries and already-applied areas as it pass over the field.

OPTRX™ CROP SENSORS

Optrx crop sensors measure and record data about crops in real time using the reflectance of light shined on the growing plants.

THE OPTIMUM PRESCRIPTION 

MEETING YOUR CROP SENSING NEEDS.

The use of crop sensing technology in grains, cereals and other production ag crops is one technique to increase plant health and yield potential. Optrx crop sensors measure the needs of your crop and provide application rate recommendations for agrochemicals in real time to maximize your profit. Related content

THE OPTRX DIFFERENCE 

What makes Optrx crop sensors stand out from the competition?

• Virtual reference strip. Unlike many other crop sensors on the market, the Optrx crop sensor doesn’t require a nitrogen-rich strip for making nitrogen application recommendations. Instead, Optrx relies on a new technology called a virtual reference strip. Growers simply identify the healthiest area of the field and scan that area in real time, rather than applying excess nitrogen to an area of the field pre-season and mapping that point
  
  
• User-friendliness. The Optrx sensor offers a user interface that exceeds previous sensors. Optrx directly interfaces with the flagship ag leader display to show the sensor readings and mapping onscreen along with other application data, such as rate control and automatic swath control
  
  
• Red-edge light wave. Optrx uses a red-edge light wave to scan plants. Most competitive products use only a red wavelength, which has been shown in studies to be non-responsive at high plant density. The red-edge lightwave stays responsive to health-stress on plants at later growth stages than other competitive products
  
  
• Single algorithm. Optrx crop sensors use a single algorithm application. Trials have been conducted in multiple states that have shown positive results of using a single algorithm in comparison to multiple algorithms
  
  
  

HOW OPTRX WORKS

Optrx crop sensors measure and record data about crops in real time using the reflectance of light shined on the growing plants. Sensors can be installed across the application boom to collect information while driving through the field. The data is logged and mapped to be used in further analysis – or for real-time variable rate applications. This kind of data is the key to precision farming. Collect information in the fields, analyze and then make decisions based on the data.

The Optrx crop sensor helps growers apply agrochemicals based on crop vigor. For example, the sensor tells the applicator to apply less nitrogen on healthy corn plants and more nitrogen on weaker, unhealthy corn plants, according to a calibration specific to that field. In addition, Optrx’s advanced light-sensing technology is not dependent on ambient light – offering maximum flexibility to be used day or night.

WHAT OPTRX CAN DO FOR YOU

• Reduce application of nitrogen in nitrogen-rich areas
  
• Increase yield potential in nitrogen-poor areas of the field
  
• Record crop vigor variation data across the field
  
• Balance the effects of organic material variability across the field
  
• Improve yield potential for crops harmed by denitrification due to poor drainage
  

CAUSES OF NITROGEN VARIABILITY

ORGANIC MATERIAL

Organic material is one of the most significant sources of nitrogen in the soil. The more organic matter present, the more nitrogen the soil produces. Because organic matter concetrations differ across soil types, nitrogen availability in the soil can vary greatly throughout a field.

DENITRIFICATION 

Denitrification occurs as a result of poor drainage and uneven moisture distribution across the field. In standing water, nitrogen in the soil changes into a gas and is lost to the air, leaving soil in some areas of the field nitrogen deficient. Denitrification can cause a loss of five percent of nitrogen per day, causing significant variation across the field.

HELPFUL CUTTING EDGE TOOLS

VEGETATION INDEX

Using built-in intelligence, Optrx assigns a "crop vigor" number or vegetation index (VI) value based on plant biomass and nitrogen content. The VI evaluates the quality and variation across the field.

CALCULATING NITROGEN RATE

To determine nitrogen rate, Optrx must first identify the VI value that represents a plant with sufficient nitrogen available; this is called the VI reference value. To determine a VI reference value, users must drive the applicator over the healthiest looking plants for a minimum of five minutes. This process calibrates Optrx crop sensors for the given growth stage.

RATE TABLE 

Optrx crop sensors are ideal for applying fertilizers, pesticides, defoliants, growth regulators and other agrochemicals on-the-go at the rates necessary for optimum performance. Working with an agronomist or crop consultant, select a vegetation index range and assign the recommended rates based on the range chosen.

PLM™ ISOBUS TASK CONTROLLER

PLM™ CROP MANAGEMENT SOLUTIONS

With PLM™ implement control systems you can automatically shut on and off individual planter sections, monitor and record planter population and control rate and flow of materials in seeding, spraying and fertilizer applications to better manage variability across your entire field.

PLM™ ISOBUS TASK CONTROLLER

Control mixed fleets of compliant isobus compatible implements using your integrated New Holland Intelliview

IV display.

• Send commands to an isobus compliant implement to modify its actions based on gps position
  
• Automatically switch on/off planter sections
  
• Prevent seed and fertilizer overlap
  
• Control application rates with prescription maps
  
• Map and log job dates
  
• Single display solution on new holland equipment for running key tractor functions, auto guidance andControlling mixed fleets of implements
  

VARIABLE RATE APPLICATION

Variability in fields can be influenced by factors such as soil properties, topography, cropping history, field use, etc. Gps position is communicated to the rate controller as the application equipment moves across different zones in the field, enabling it to vary application rates by zone.

Rather than just applying a constant seed rate, apply higher seed populations in well irrigated, or highly fertile, areas to maximize yield performance and lower application rates in less fertile areas or areas with poor irrigation.

Also apply more or fewer chemicals or fertilizers in areas as needed, lowering input cost and further enhancing yields.

AUTOMATIC SECTION CONTROL

Section control automatically shuts off rows or sections, eliminating double applications of seed and fertilizer. It uses the tractor’s gps system to automatically turn on and off individual planter sections in areas that have already been covered, or at headland turns, point rows, waterways, terraces, etc. Double planting of rows is avoided, enhancing yields and eliminating waste.

FIELD-IQ CROP INPUT CONTROL SYSTEM

The Trimble® Field-IQ™ crop input control system enables productive and efficient functionality for your planting and nutrient and pest management operations. The field-iq system works with the Trimble TMX-2050 display, FMX® integrated display and CFX-750™ display.

The Field-IQ™ crop input control system provides key precision agriculture functionality for your flow and application control, including:

VARIABLE RATE APPLICATION CONTROL

Save on input costs by monitoring and simultaneously varying up to 6 different materials to precisely plant seeds, apply chemicals, and broadcast fertilizers. 

• Keep as-applied mapping records of inputs 
  
• Adjust your seed population, fertilizer rates, or spray application manually or using a prescription created with Farm Works™ mapping software 
  
• For more efficient fertilizer utilization, add a gGreenseeker® system
  

AUTOMATIC SECTION CONTROL

Increase your profits by avoiding double coverage and eliminating wasted inputs using automatic or manual section control.

• Automatically control up to 48 rows individually for maximum savings and increased yields 
  
• See where you have been and what you have done with overlap detection 
  
• Eliminate overlap by adding Tru Count Air Clutches® and Tru Count Liquiblock™ valves
  

SEED MONITORING MONITOR

Real-time seeding information or fertilizer delivery lines and prevent costly planter problems by catching them early before they cause yield reduction.

• See the results of singulation analysis, including information on population, singulation, skips/multiples, spacing, and quality of spacing

MANURE MANAGEMENT

Spreading waste-based nutrients can help you grow more, while lowering fertilizer cost and protecting the environment. It is important that manure is always applied within an acceptable area and not dispersed where regulations prohibit. Manure management using the fm-750 will record dispersal location and keep track of the nutrients that have been applied on your farm.

LIQUID SPREADING

• Precisely monitor and control liquid spreading applications, saving input costs and meeting environmental regulations 
  
• Create prescription maps and vary the rate depending on manure and soil properties 
  
• Ensure that manure is being applied in the correct areas and not where regulations prohibit 
  
• Track applied nutrients and record dispersal locations
  

DRY SPREADING

• Utilize the FM-750™ display to help you accurately map and apply dry manure when spreading 
  
• Ensure that manure is being applied in the correct areas and not where regulations prohibit 
  
• Track applied nutrients and record dispersal locations
  

GREENSEEKER CROP SENSING SYSTEM

The Trimble® Greenseeker® Crop Sensing system helps you effectively and precisely manage crop inputs onthe- go. With greenseeker, you can address field variability by applying the right amount of fertilizer, in the right place, at the right time.

• Create a high-yielding environment for your crop to grow 
  
• Reduce nutrient input costs by eliminating excess application 
  
• Eliminate the need for application maps or agronomist recommendations 
  
• Operate night or day, and in fog or clouds

The greenseeker system uses optical sensors to measure and quantify the variability of the crop. It then creates a targeted prescription to treat the crop variability. Use greenseeker to apply your UAN, UREA, and NH3 to help increase crop yields and ultimately increase your profitability.


FEATURES

• Provides instant sidedress fertilizer application for inputs such as nitrogen 
  
• Uses optical sensors to measure and quantify crop health—or vigor 
  
• Compatible with both the TMX-2050™ display and FMX® integrated display 
  
• Works with most variable rate controllers and delivery systems 
  
• Can be mounted on booms on most sprayers/spreaders
  

WEEDSEEKER® SPORT SPRAY SYSTEM

The Trimble® Weedseeker® spot spray system is an effective solution to help you efficiently control weeds. The weedseeker system senses if a weed is present and signals a spray nozzle to deliver a precise amount of chemical—spraying only the weed and not the bare ground. It is most effective in areas where weeds occur intermittently.

• Save on overall weed control costs 
  
• Reduce chemical usage by applying precisely and in low amounts 
  
• Reduce the environmental impact of your field activities 
  
• Cut down on time and labor 
  
• Operate day or night at speeds up to 10 mph*
  

*higher speeds are achievable by remotely mounting the spray solenoid

Use Weedseeker to automatically spot spray your orchard, vineyard, fallow field, or row crop. Control weeds in chem-fallow operations, pre-plant weed spraying, as well as post-harvest weed control.