ANTENNA/RECEIVERS

AG LEADER







GPS 6000

Entry-level option for growers seeking a cost-effective receiver. Single-frequency receiver designed for general mapping and autoswath functions.

  • Differential corrections include glide, waas/egnos
  • Glonass standard
  • Glide offers improved accuracy without subscription-based differential correction
  • Increased signal uptime provided by standard stableloc™ technology
  • Outputs simulated radar speed
  • Up to 10 hz output
  • Led diagnostics for at-a-glance system monitoring
  • Integrated magnets and included mounting plate with locating pins provide repeatable mounting
  • Sealed, compact, rugged design

GPS 6500

Fully scalable, rugged smart antenna, designed to meet the need of extended rtk baselines in excess of 20 miles utilizing the relay cdma or relay gsm via a ntrip solution.

  • Differential corrections include glide, waas/egnos, terrastar and rtk (with relay). 
  • Glonass standard 
  • Glide offers improved accuracy without subscription-based differential correction. 
  • Increased signal uptime provided by standard stableloc™ technology. 
  • Outputs simulated radar speed. 
  • Up to 20 hz output. 
  • Led diagnostics for at-a-glance system monitoring. 
  • Integrated magnets and included mounting plate with locating pins provide repeatable mounting.
  • Sealed, compact, rugged design. 

-TERRASTAR-C

  • 1.5'' (4cm) repeatible accuracy (rms) 
  • Quick reconvergence 
  • Incorporates gps and glonass signals 
  • Terrastar subscriptions available from ag leader in 5 day, 3 month and 12 month lengths


-GLIDE

Glide offers superior pass to pass performance in situations when a differential signal is not available.

  • Works globally (does not require waas or egnos) 
  • Creates smooth positioning for steer applications 
  • Further enhances performance by accounting for ionosphere delay 
  • Especially suited to geographies with high-ionosphere disturbance 
  • Mitigates scintillation events 
  • Gps 6500 enhances absolute accuracy with glide because of dual frequency gnss capabilities 


Applications  GPS 6000   GPS 6500   
GUIDANCE
✓
✓
TILLAGE
✓
✓
HARVESTING
✓
✓
FIELD PREPARATION
✓
✓
MAPPING (POINT, LINE, AREA)
✓
✓
VARIABLE RATE CONTROLLERS
✓
✓
SPREADING
✓
✓
SPRAYING
✓
✓
LOG HYBRID/VARIETY
✓
✓
STRIP-TILLING

✓
INTELLISLOPE (TILE PLOW) 

✓
INTEGRATED/HYDRAULIC STEERING
✓
ASSISTED STEERING
✓
✓
DIFFERENTIAL CORRECTIONS 


GLIDE
✓
✓
WAAS/EGNOS
✓
✓
TERRASTAR

✓
 RTK

✓


NEW HOLLAND






AG-162 GNSS RECEIVER

A low-cost smart antenna ideal for farming operations that require less demanding accuracy levels.

  • Simulated radar speed output 
  • L1 signal support 

AG-372 GNSS RECEIVER

A high-performance, dual-frequency gps and glonass smart antenna receiver, delivering unmatched accuracy and performance for farming operations.

  • gps and glonass enabled
  • Industry-leading 220 channels
  • Simulated radar speed output
  • L1/L2/L2c signal support

TRIMBLE






AG 25 RECIEVER

The Trimble AG25 GNSS antenna is compact and housed in a rugged unit, making it ideal for monitoring and seismic applications that require reliable and high accuracy.

  • GNSS support including gps, glonass, sbas and l-band 
  • Enhanced ability to track lower elevation satellite signals 
  • Built-in magnets for quick and simple installation 
  • Can be installed permanently using the 5/8 inch thread 
  • Improved multipath mitigation 
  • TNC connector 
  • Compatible with the NETR9 TI-M monitoring receiver 

AGGPS 542 GNSS RECEIVER

An advanced, dual-frequency GNSS receiver, ideal for areas with irregular satellite reception.

  • Industry-leading 220 channels 
  • Integrated 900 or 450 mhz radio 
  • L1/L2/L2c/L5 signal support 
  • Configurations include: fixed base station, mobile base station, and rover receiver

DCM-300 MODEM

The rugged and robust DCM-300 modem provides wireless 3g connectivity for Connected Farm™ solutions. It enables reliable access to Trimble® Centerpoint™ VRS™ corrections, Trimble Centerpoint™ RTX™ corrections as well as other 3rd party network RTK solutions.

The modem can be used with connected farm for wireless data transfer between the office and field and vehicle to vehicle – allowing quicker access to data. Compatible with most brands of equipment, the modem can also capture real-time fleet positions, public can messages, and fleet productivity information. The DCM-300 is available with either EV-DO REV A or a global ready HSDPA/UMTS network technology which support popular cellular networks such as verizon and AT&T.

  • Works with all brands of equipment and easy-to-install 
  • Enables reliable access to Trimble Centerpoint corrections as well as other 3rd party network rtk solutions 
  • Provides wireless connectivity for connected farm solutions including fleet management, vehicle to vehicle data exchange, office to field data exchange, and more